News — Stainless Steel
How to Choose a Sinker
Posted by Pam Bialiy on
The following article has been authored by John Heaney. While determining if a sinker is needed is easy; determining what type of sinker needed may be less obvious. USP <711> does allow for sinkers made from twists of inert wire. This can be especially handy for R&D where the method is being developed and an experiment is being run to see if the sinkers provide more consistency to the results. For use in other environments, such as QC, it would require the users to be trained on the correct length of inert wire to cut, as well as the spacing...
Cleaning Stainless Steel
Posted by Pam Bialiy on
The following article has been authored by John Heaney. Dissolution components are often made of 316 Stainless Steel (316 SS) or equivalent as it is a material specified in USP <711> for the construction of both Apparatus 1 (Baskets) and Apparatus 2 (Paddles). 316 SS has a reputation for being impervious to corrosion but that is not the case as it is merely resistant to corrosion. It requires care and maintenance just like any other item in the lab. 316 SS’s corrosion resistance is due to the inclusion of additional Molybdenum to the mixture for the steel. This means compared...